
KEMO英國電池充電器 (M102A)
適用于 6 至 24 V 鉛蓄電池。使用此蓄電池分離濾波器,2 個蓄電池在一個充電電流源(汽車發電機、太陽能系統、風車、充電器等)上單獨充電。
¥聯系客服
保 障:
原裝正品售后保障增值稅發票免運費
描述
產品名稱:電池充電器
品牌:KEMO
產地:英國
型號:M102A
**大充電電流:10 A,冷卻時**大20 A(總電流)
尺寸:約 87 x 60 x 33 毫米(不含固定帶)

Second battery charger 6 - 24 V/DC [M102A]
For lead accumulators 6 to 24 V. With this accumulator separating filter 2 accumulators are charged separately at one source of charging current (vehicle generator, solar systems, windmills, chargers etc). For charging currents up to 10 A at maximum (with cooling 20 A). The charging current distributes in such a manner that an empty battery will be charged more than an battery that is almost charged. It is perfect for motor caravans if one battery operates the television, radio etc. and the second battery must remain charged in order to start the motor. Or for weekend cottages if one battery used for the alarm system must not be emptied. A compensating current of approx. 0.005 A may flow between both accumulators (during normal operation at 12 V). This serves the purpose to enable a solar regulator, which is possibly connected in series the possibly necessary voltage control.
Technical Data
Batteries to be connected:2 each of the same voltage 6 - 24 V/DC
Max. charging current:10 A, with cooling 20 A at maximum (total current)
Dimensions:approx. 87 x 60 x 33 mm (without fixingstraps)
品牌:KEMO
產地:英國
型號:M102A

KEMO 電池充電器 M102A
適用于 6 至 24 V 鉛蓄電池。使用此蓄電池分離濾波器,2 個蓄電池在一個充電電流源(汽車發電機、太陽能系統、風車、充電器等)上單獨充電。充電電流**大可達 10 A(冷卻 20 A)。充電電流的分布方式是,空電池比幾乎充滿電的電池充電得更多。如果一個電池可以運行電視、收音機等,而第二個電池必須保持充電才能啟動馬達,那么它非常適合大篷車?;蛘邔?duì)于周末小屋,如果用于警報系統的一節電池不得清空。補償電流約為0.005 A 可能會在兩個蓄電池之間流動(在 12 V 的正常操作期間)。這用于啟用太陽能調節器,該調節器可能串聯連接可能需要的電壓控制。
英國KEMO電池充電器 (M102A)技術數據
要連接的電池:2 個相同電壓的 6 - 24 V/DC**大充電電流:10 A,冷卻時**大20 A(總電流)
尺寸:約 87 x 60 x 33 毫米(不含固定帶)

Second battery charger 6 - 24 V/DC [M102A]
For lead accumulators 6 to 24 V. With this accumulator separating filter 2 accumulators are charged separately at one source of charging current (vehicle generator, solar systems, windmills, chargers etc). For charging currents up to 10 A at maximum (with cooling 20 A). The charging current distributes in such a manner that an empty battery will be charged more than an battery that is almost charged. It is perfect for motor caravans if one battery operates the television, radio etc. and the second battery must remain charged in order to start the motor. Or for weekend cottages if one battery used for the alarm system must not be emptied. A compensating current of approx. 0.005 A may flow between both accumulators (during normal operation at 12 V). This serves the purpose to enable a solar regulator, which is possibly connected in series the possibly necessary voltage control.
Technical Data
Batteries to be connected:2 each of the same voltage 6 - 24 V/DC
Max. charging current:10 A, with cooling 20 A at maximum (total current)
Dimensions:approx. 87 x 60 x 33 mm (without fixingstraps)
提示:“英國KEMO品牌M102A產品”內容及圖片來自廠商官網、翻譯或互聯網引用等,內容僅供參考,以最終簽訂合同為準,如有差錯或異議可聯系我們更改。